Assembly Operative - £6.08/hour
Newark, Nottinghamshire - 0 miles
My client is a leading manufacturer based near Newark, an opportunity has arisen for an Assembly Operative.Due to their peak season we currently have a number of opportunities for Assembly Operatives to work on temporary contracts for approximately 1 - 3 months although permanent work may be offered to those who perform well.Candidates will be required to work in a fast paced workshop environment and will carry out duties such as operating machinery, using hand tools and power tools to assemble the buildings, applying protective coatings, quality checking and packing of finished products.Candidates must have previous experience within a busy manufacturing environment and ideally have good DIY skills and experience of using hand and power tools.This temporary vacancy is being advertised on behalf of Temp-Team Limited | |
Production Operative - £6.03 - £8.04/hour
Sleaford, Nottinghamshire - 0 miles
This Vacancy is being advertised on behalf of Redrock On Demand who is operating as an employment business. The purpose of this role is to carry out the day to day production tasks effectively and efficiently. The ideal candidate will: - Have previous experience within a similar environment- Have excellent Numerical skills- excellent communication skills- Have a hard working attitude.- CIEH level 2 in food safety is not essential, but would be advantageous. Your main duties will be :- Operate Machinery- Carry out heavy lifting up to 25Kgs- Carry out manual dexterous tasks- Packing and labelling- Complete any required checklists and paperwork. If you are interested in working for this progressive company, please email your CV as soon as possible |  |
HYGIENE MANAGER - NIGHT SHIFT - £30000 - £40000/annum BENEFITS AVAILABLE ON APPLICATION
Nottinghamshire - 0 miles
Vacancy: HYGIENE MANAGER (NIGHT SHIFT - 5.30PM TO 5.30AM)Location: EAST MIDLANDS (Commutable from Nottingham, Lincoln, Leicester, Derby, Sleaford)Salary: £to40000PA + benefits on application.The main purpose for this role is to lead and manage a team of hygiene operators to ensure that factory hygiene standards are met and that the factory is handed back to operations in a timely manner with full operational capability at the required start up time.Responsibilities:* Health and safety checks* Hygiene schedule completion* Budget control and reduction* Control of PPE* Continual improvement of the hygiene department* Conduct internal hygiene audits* Client audit compliance and factory preparation* Management and control of non conformances* Team training management and development* Control of incorrect working practices in relation to personnel, equipment or processes* Effective shift handovers to operations team* Team briefings* Attendance to factory meetin |  |
HYGIENE SUPERVISOR - NIGHT SHIFT - £25000 - £33000/annum BENEFITS AVAILABLE ON APPLICATION
Nottinghamshire - 0 miles
Vacancy: HYGIENE SUPERVISOR (NIGHT SHIFT - 5.30PM TO 5.30AM)Location: EAST MIDLANDS (Commutable from Nottingham, Lincoln, Leicester, Derby, Sleaford)Salary: £to33000PA + benefits on application.The main purpose for this role is to lead and manage a team of hygiene operators to ensure that factory hygiene standards are met and that the factory is handed back to operations in a timely manner with full operational capability at the required start up time. This role reports to the shift hygiene manager.Responsibilities:* Health and safety checks* Hygiene schedule completion* Budget control and reduction* Control of PPE* Continual improvement of the hygiene department* Conduct internal hygiene audits* Client audit compliance and factory preparation* Management and control of non conformances* Team training management and development* Control of incorrect working practices in relation to personnel, equipment or processes* Effective shift handovers to operations t | |
Temp to Perm CNC Machinist - £19000/annum
Nottingham , Nottinghamshire - 0 miles
Our client is looking for a skilled and experienced Machinist to join their small, busy Manufacturing Team. You will be working on one offs and small batch work manually setting lathes/milling machinery to tight tolerances. Candidates must have proven experience with horizontal borers, milling and turning machinery.The role requires excellent attention to detail with a solid proven track record in a similar position.Initially the position is available on a temporary basis so candidates must be available for immediate start.Apply today!Unfortunately we are unable to contact all candidates due to the large volume of applications we receive. If you have not heard from a consultant within the next three days please assume that you have not been successful on this occasion. Please do not hesitate to apply for other suitable roles in the future | |
Maintenance – Packaging Machines - £25000 - £30000/annum £13.80 - £15.00 per hour (various s
Nottingham, Nottinghamshire - 0 miles
Maintenance – Packaging MachinesNottingham£13.80 - £15.00 per hour (various shifts)Immediate maintenance opportunities with a reputable manufacturer of beauty products.Multi-disciplined maintenance engineer(s) required to work on high-speed production and packaging lines. Carrying out PPM and breakdown maintenance, fault-find and rectification with minimum disruption to production. The majority of breakdowns are mechanical but a good appreciation of electrical faults would be beneficial.- Apprenticeship Essential- Maintenance of packaging or process machinery, ideally within a high-speed, continuous production environment- Proven fault-finding & diagnostic skills- Teamwork and good communication skills with the production staffOpportunities available across all 3 shifts |  |
CNC Miller - Programmer - £11 - £12/hour
Nottingham, Nottinghamshire - 0 miles
Our client are looking to recruit a day shift based CNC Miller to join their team.You will be an experienced Miller with experience of setting, operating and programming and be expected to run numerous small low volume batches changing and programming 2 or 3 times per shift on average.You will be used to working on components with extremely tight tolerances and be able to work to very fine detail and accuracy.You will have worked in an aerospace, automotive or similar environment for a number of years you will be able to fit straight into an existing highly skilled team of engineers. Ideally you will have Haas experience however if you have programming skills you should be able to pick this up and training on machines can be given to the right candidate.In return you will be joining an excellent company who are experiencing some fantastic results and growing at a strong pace. You will receive an excellent hourly rate plus a shift premium | |
Bench Hand - £6 - £6.50/hour
Nottingham, Nottinghamshire - 0 miles
Our client is one of the UK’s leading internet based providers of unique wooden furniture. All of their products are handmade solely from 100% eco-friendly British reclaimed wood Due to continuing company growth and the opening of their new manufacturing unit they are seeking a furniture workshop assistant/Bench Hand to join their friendly team. . Working under the furniture workshop manager you will be part of a small team assisting with the production of quality, handmade solid wood furniture from reclaimed wood. You will be involved in furniture quality control, assisting with manufacturing, sanding and wood finishing and the basic assembly of furniture along with any other workshop duties that arise to meet the needs of the business. Ultimately, you will be committed to quality working practice and ideally seeking the opportunity to develop a career within a dynamic expanding organisation.Candidates will need to have a genuine interest in furniture / woodwork and a good |  |
Warehouse Operative - £6.93/hour
Newark, Nottinghamshire - 0 miles
Urgent requirement **Our Newark client is looking to recruit 2 Warehouse Operatives on a full-time temporary basis. If you are an experienced Warehouse Operative and are available immediately then please get in contact! Applicants must have experience in performing assigned warehouse processes and activities, a working knowledge of warehouse processes and good organisational skills. An NVQ Level 2 in Warehousing and Distribution is also desirable.Start date: ASAPSalary: £6.93 per hourHours: Monday – Friday 9am – 5.30pm (All candidates must be willing to work 3 shifts and work overtime at a weekend if required) Location: NewarkIf you are reliable, able to work quickly and to tight deadlines, work as a team player and are flexible then please send your CV.Due to the high level of expected applications, if you have not received a reply from us within 2 days of applying then please assume you have not been successful on this occasion |  |
Seamstress/ Tailor/ Sewing - Alterations & Repairs - £6.20 - £6.50/hour
Nottingham, East Midlands - 12 miles
We are looking for an experienced sewing machinist to work for our client in branch. Good communications skills and are essential. The successful candidate will be responsible for making alterations and repairs to garments, and also to soft furnishings within the agreed timescales. You must also have the ability to offer solutions to any problems that may arise.Candidates will be expected have previous experience of completing alterations and repairs within a customer facing environment and project a professional image at all times |  |
Industrial Sewing Machinist - £6.08 - £6.50/hour
Chesterfield, Derbyshire - 19 miles
We are currently looking for experienced Industrial Sewing Machinists in the Chesterfield area. Some of the work will involve sewing fibre glass covers, which may irritate skin, although gloves and masks can be supplied if needed. Hours of work will be Monday to Thursday 0800-1600 and Friday 0800-1230. £6.08 per hour to start and rising to £6.50 after training which will normally be about 8 weeks. Ongoing position to replace a member of staff that is leaving. Applicants must live within 10 miles of the Chesterfield area.Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion |  |
Technical Office Assistant - £7.00 - £8/hour
Matlock, Derbyshire - 19 miles
Our client - a well established Derbyshire company operating in a niche market, urgently requires a Technical Office Assistant for a 6 month assignment. The successful candidate must have his/her own transport (company is not situated on good public transport routes) and hours of work will be Mon-Thur 0830-1715hrs and Friday 0830-1700hrs with 30 minutes for lunch. Main duties involve creating,correcting and modifying bills of materials,wiring diagrams, instruction manuals, and drawings for its products using Microsoft Word and Publisher and Adobe Illustrator software packages. Good written and oral communication skills are essential as effective liaison between internal and external departments is very important. In addition, he/she, must have excellent attention to detail and ideally be educated to HNC standard or higher in mechanical or electrical engineering, and have a genuine interest in these fields. This role will help to facilitate the release of the Technical Office Manage | |
Bending M/C Operator - £9.58 - £11.73/hour
Derby, Derbyshire - 19 miles
This vacancy is being advertised by Shorterm Ltd. (EB)CNC Bending M/C Operator, on going contract DerbyYou must be familiar with all bending m/c operations being able to interpret engineering drawings and manufacturing instructions you must therefore have a keen eye for detail in order to produce accurate work to fine tolerances for both small batch and larger runs.You will need to have worked on such machinery both setting and operating and ideally programming for at least 3 years within aerospace, automotive, rail or general engineering production.This is an on -going contract opportunity at least 6 months contract based in Derby, you will be required to work on a shift basis mornings, afternoons and most likely nights as well.To discuss the role further please call Andrew Clemens on 07841 278684 or email your Cv |  |
Composite Laminators - £14 - £15/hour
Derbyshire - 19 miles
My client seeks experienced Composite Laminators for their busy production facility based in Derbyshire. You will be experienced within the F1 industry and be prepared to work hard and deliver on targets. There is the opportunity for this role to go permanent for the right candidate.If you would like to hear more about this opportunity then please send an updated CV to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion |  |
Quality and inspection operative - £5.98 - £6.47/hour
Derby, Derbyshire - 19 miles
GI Group are looking for Quality and Inspection operatives to work in the sinfin area, the shifts are 4 on 4 off 12 hour shifts starting at 6am/ 6pm. Previous quality experience is essential this is for a 3 month contract within a very busy warehouse environment. Please call Laura Sherratt on 01332 625238Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion | |
Production Operatives - £5.93 - £6.08/hour
Ashbourne, Derbyshire - 19 miles
Our client, a Derbyshire based food production company, require a number of Production Operatives to work rotating shift pattern6 am - 2.15 pm and 2.15 pm to 10.30 pm. Transport can be provided.A flexible approach to the changing needs of the business is required. You must be willing to gain a variety of experience to enable you to work in different areas of the factory. This is an essential requirement to ensure that customer orders are met on time and within budget.Suitable candidates will undertake an induction and have Basic Food Hygiene Training in order to work on site. This is undertaken at the Derby office and will take approximately 2 hours. Following this training you will be 'qualified' to work on site with our client.Previous experience of working rotating shifts would be desirable, but not essential | |
Machine Minder - £6.08 - £7.18/hour Plus shift allowance
Ashbourne, Derbyshire - 19 miles
Our client are seeking to recruit 2 x individuals to undertake the role of Machine Minder within a food production environment. You must be able to work a rotating shift pattern over evenings and weekends. The purpose of the role of Machine Minder is to optimise the performance and set-up of specific production or engineering equipment. You will be required to assist the Engineering team by responding to minor breakdowns and carrying out routine lubrication and maintenance tasks on equipment under strict supervision of the Engineering team.The principal objectives of the role are as follows:To ensure equipment is set-up correctly and running at optimal performance.Monitor and suggest improvements to enhance machine performance. To respond to minor breakdowns.To carry out minor repairs and to assist the engineering team as required.To carry out cleaning, lubrication and maintenance tasks as advised by Engineering.To report running defects and faults to Engineering.Adher | |
Health & Safety Assistant - £7 - £7.60/hour
Ashbourne, Derbyshire - 19 miles
Our client are seeking an experienced Administrator with a keen interest in Health and Safety, to provide a professional and confidential administrative service to the Ashbourne Health and Safety Department. High levels of organisational skills are required to prioritise workloads and attention to detail is essential.The post holder will assist the H&S Advisor and effectively interact with other operatives and supervisory staff to help develop and drive a positive H&S culture. There will also be involvement in H&S projects and initiatives Duties and Responsibilities:•Gain a full understanding of food product.•Contribute to the H&S department/ add value by developing requisite skills in this area in line with company competency framework.•Input data into system and complete statutory records and update and maintain H&S data systems.•Collate H&S records and file for long-term storage.•Collate and prepare weekly and monthly re | |
Maintenance Technician – Electrical - £13/hour £13 ph
Foston, Derbyshire - 19 miles
A Derbyshire based company are seeking an Electrical Maintenance Technician to join their expanding team in Foston. As a world leader in their field, you will be part of a team committed to developing and manufacturing one of the most advanced engines of its time. The company pride themselves on their passion and vigour of its employees making it a remarkable place to work.As an Electrical Maintenance Technician you will:• Assist in supervising and maintaining a busy production line.The ideal Electrical Maintenance Technician will hold the following skills and experiences:• Experience with Siemens S7 controls and supervision. • Mechanical experience would be ideal but not essential. • Production or manufacturing background would also be an advantage. • Some involvement with HMI Programming.You will be working shift patterns which include both day and night work with an average of 40 hours per week.This is a temporary position for 13 weeks lead |  |
Effluent Operator - £8 - £8.47/hour
Ashbourne, Derbyshire - 19 miles
Our Client, a food production company who slaughter and produce chicken are seeking an effluent operator to optimise the performance and set-up of specific production or engineering equipment. The following (rotating) shift pattern applies to this role:2 x day shifts 6 am to 6 pm2 x night shifts 6pm to 6 am4 days offYou will assist the Engineering team by responding to minor breakdowns and carry out routine lubrication and maintenance tasks on equipment under the supervision of Engineering. You will understand the importance of strict adherence to Hygiene, Health & Safety requirements and to maintaining safe working practices. You will also have the ability to identify and act upon any opportunity to enhance the performance of machines and equipment.Duties and responsibilities of the role include:To gain a full understanding of poultry in the company.Contribute to the Engineering department and add value by developing requisite skills in this area in line with co | |
Multi Skilled Production Operative - £6.50/hour
Derby, Derbyshire - 19 miles
Our client is looking to appoint a Multi-Skilled Production Operative who will be based in a workshop in the Little Eaton area. You will have proven experience operating machinery and it is necessary to have a full clean license due to driving the company van (over the age of 25 for insurance purposes). The successful candidate will be of a smart appearance with a friendly personality and be an effective communicator as you will have to go out to customer/client premises and work off-site. A good standard of English and maths is required and also attention to detail. The general duties of the role include operating machinery, measuring and mixing chemicals, driving company van, visiting customers/clients, working in the workshop. This role has the opportunity to go permanent for the right candidate. For further information please contact to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progre | |
MRP Controller - £9.50/hour
Derby, Derbyshire - 19 miles
MRP/Planning ControllerDerbyOngoing Temp c£9.50phWorking for my client, who are an international provider of logistics, equipment and services to the aerospace, defence and nuclear industries, you will be working within a small Planning team to provide support and project management.The role will include updating materials usage and planning load and capacity. You will need a proven track record of scheduling and linking works orders with planned time to the shop floor and also inputting Bills Of Material onto systems. Knowledge of technical drawings would be an advantage along with SAP/MRP experience.Immediate interview and start for right candidate |  |
Overlocker Machinist - £6.08/hour
Derby, Derbyshire - 19 miles
GI Group are advertising for a Overlocker to work in the derby area, the client we are recruiting for are a very well established company who provide a professional and personal service in the design and manufacturing business. The position involves overlocking swatch and sample books for both upholstery and retail clients, preferably you must hold experience in upholstery overlocking as appose to garments. Please apply by emailing you cv or calling 01332 290188Due to the high volumes of applications we are currently receiving, unfortunately we are only able to contact candidates who are successful in progressing to the next stage. If you have not been contacted within 7 days of your application, then please presume that you have not been successful on this occasion | |
Contract Quality Engineer – 6 Month Contract -
Doncaster, North East - 26 miles
Our client is an established manufacturer of metal and fibre based products selling to a wide customer base. They now require a contract Quality Assurance Engineer to support the QA Manager for EMEA at the headquarters in Doncaster for at least 6 months. The requirements for the role are as follows:-Principal Accountabilities (Major end results the job is expected to achieve)• Respond to Red Alert enquires/orders ensuring risks are identified and controlled. • Progress customer complaints ensuring they are investigated (root cause), resolved and closed in a timely manner.• Mitigation of risk and (mini) project management of sales orders which are complex in terms of QA requirements.• Prepare documentation (e.g. inspection & test plans) necessary for customers and to ensure error free execution of orders.• Carry out internal audits of Operations and admin functions (quality and environmental).• Identify opportunities for improvement.Knowl | |
Stock Auditor - £7.50 - £8.50/hour
Loughborough, Leicestershire - 34 miles
WAREHOUSE STOCK CONTROLLER / STOCK AUDITOR£7.50 - £8.50phLoughboroughWe currently have 2 new positions available within the warehousing department of a large international manufacturing firm. Job Role:Working in the companies stores department, reporting in to the warehouse manager and Performance improvement manager.Counting and checking stock within storesAuditing stock and pickers performance / pick accuracyInvestigating errors or discrepancies to conclusionProviding reports and real-time updates to managersPerson:Educated to minimum 5 GCSE (A-C) or specific job related experienceMinimum 3 years previous warehouse experienceMust have Stock checking / Stock Control / Auditing experienceExcellent organisational skillsStrong IT skills - able to present data easilyPrevious WMS or SAGE experienceAble to work to deadlines and manage own timeAttention to detail and a logical approach to work and problem solvingForklift Counterbalance and/or Bendi/Pivot |  |
Production Operative - £7.14/hour
Loughborough, Leicestershire - 34 miles
Production Operatives required - must be reliable & able to get to Shepshed, LoughboroughWe have a long term assignment due to start on Monday, 26th SeptemberDo you have a CRB that was issued within the last 30 days (since 26th August 2011)?Must have a good command of reading & writing English documentsThe role will involve lifting heavy boxes as well as some document checkingPlease call Reina, Karen or Amy on (0116) 253 0516 or email us at |  |
Credit Controller - Part Time - £0 - £17000/annum
Loughborough, Leicestershire - 34 miles
p>Long established, profitable manufacturer, a leader in its field seeks a key team member to work within the finance team. The facilities are modern and spacious; the working environment is positive and friendly. The hours required are 20-25 per week working over 5 days, Monday to Friday and the role is well established, involving the usual credit control responsibilities: <ul> <li>Calling customers regarding payment of outstanding balances, building relationships</li> <li>Reconciling accounts</li> <li>Issuing credit notes, where appropriate</li> <li>Allocating cash received</li> <li>Issuing monthly statements</li> <li>Reducing 'debtor days outstanding' where possible</li> <li>Reporting directly to the Financial Director</li> <li>Managing and prioritising your own workload</li> <li>Liaising with other staff as appropriate</li> < |  |
Sewing Machinist - Leather - £6.50/hour
Leicester, Leicestershire - 34 miles
Sewing Machinist - LeatherWe are looking for skilled leather sewing machinists for our client.The company's main business centres around the manufacture of specialist high end products such as, bags, footwear and outer garments.The ideal candidate will have experience of working as a leather sewing machinist working to a very high standard and maintaining accuracy.The candidate will be responsible for ensuring desired quality standards and quantities are met.Previous experience of using associated machines is essential including automatic flatbed, overlock, twin needle, post machine and top stitching etc.If the above is of interest please contact the office now on +44 (0) 1204 393000 | |
Print Machine Assistant - £6 - £9/annum £6.55 - £8.86 per hour
Leicester, Leicestershire - 34 miles
A fantastic opportunity has arisen for a Print Machine Assistant to join the team of an award winning and successful volume manufacturing business based in Leicester. You will receive a salary of up to £8.86 after the training period (£6.55 ph during the 3 month training period) plus excellent overtime / holiday arrangements, and the security of working for a well established local company.As Bindery Assistant / Print Machine Assistant your duties will include:• Setting and operating machinery involved in print finishing and catalogue binding• Working on a three shift rotating pattern• Following company policies and procedures, ensuring that best practice is adhered to at all times• Ensuring that down-time is kept to a minimum and the machinery is operating at maximum capacityThere is overtime available at weekends, and a flexible approach is requiredThe ideal Print Machine Assistant will have the following skills and experience:• Pr | |
Brick Cutter - £6/hour
Enderby, Leicestershire - 34 miles
Factory Op with experience on various masonry saws to cut bricks for cladding required for immediate start. 12 week temporary to permanent. Excellent opportunity for the right person with career progression when 12 week temp succefully completed. Must be experienced on large spinning saws as can be dangerous to the unskilled. Send CV for more info. AGENCY |  |
Sheet Metal Fabricator - £8 - £13/hour
Wigston, Leicestershire - 34 miles
Sheet Metal Fabricator required for full time work. Start at 7.30am - located in Wigston. Pay rate dependant on experience. On going work - Send CV for more info. AGENCYSheet Metal Fabricator required for full time work. Start at 7.30am - located in Wigston. Pay rate dependant on experience. On going work - Send CV for more info. AGENCY | |
Quality Engineer - £12 - £12.01/hour Circa £12ph
Leicester, Leicestershire - 34 miles
I am currently recruiting a Quality Engineer initially on a 6 month contract basis with a view to go permanent for a manufacturing (ISO9001) company situated in Leicester The company are a mechanical engineering company with a great reputation. They are looking for a Quality Engineer with good inwards, testing & problem solving experience. The successful applicant can expect an hourly rate circa £12 and a permanent salary circa £25k. If you are interested in the position please apply below0845 06 55 370Closing Date – 13/10/11 |  |
Accounts Payable Clerk - £7.50 - £8.00/hour
Leicestershire - 34 miles
An exciting Accounts Payable Clerk post has arisen based in Leicestershire working for a international business within a busy and dynamic finance team. Reporting to the Accounts Payable Manager, duties will include: * Ensuring correct approval of invoices, and timely payments for sterling invoices * Coordinating all paperwork pertaining to the payment and collate prior to posting * Filing of all documents relevant to approval to provide a clear audit trail * Preparing creditors reconciliation's and follows up any queries * Sorting all the accounts daily mail in to invoices, statements and letters * Confirming all details on the invoice match delivery details, quantities and price * Ensuring correct nominal codes are used * Dealing with invoice queries internally and externally * Liaising with suppliers on the telephone and by written documentation * Ensuring all invoices, delivery notes and statements are filed correctly * Producing a monthly cheque run * General cle | |
Assembly Operative - £6/hour
Coalville, Leicestershire, England, Leicestershire - 34 miles
Assembly Operatives with experience of using air tools. You will be assembling various household items and moved around three assembly area's throughout the day. Temporary to permanent role 12 weeks - salary approx 15k pa when permanent. Long term solid employer with very low turnover. Start date beginning of June 2011. Working Hours approx 7am to 3.30pm Monday to Friday |  |
Sheet Metal Fabricator - £8 - £12/hour
Leicestershire - 34 miles
Sheet metal fabricator needed for on going work in the wigston area. Must have experience and be able to fabricate stainless steel. Immediate start for the right person. Send CV asap for more info. AGENCY.Sheet metal fabricator needed for on going work in the wigston area. Must have experience and be able to fabricate stainless steel. Immediate start for the right person. Send CV asap for more info. AGENCY | |
CNC Roller - £8 - £10/hour
Leicestershire - 34 miles
CNC Roller - must have experience in manual rolling and be able to work with great attention to detail. Wigston area. 12 week temp 2 perm. Send CV for more info. AGENCY | |
Upholsterer - £8 - £11/hour
Leicestershire - 34 miles
Quality Upholsterer required for either temp to perm or straight perm work. Must have experience with curtains and furniture and be able to work manually from drawings. Broughton Astley Area. Send CV for more info. Agency | |
Stainless Steel Metal Fabricator - £8 - £12/hour
Leicestershire - 34 miles
Sheet Metal fabricator required for fabricating firm based in the Wigston area. MUST be experienced in working with stainless steel. On going work. Send CV for more info. AGENCY | |
Print Machine Operator - £9 - £12/hour £9.50 - £12.10 per hour
Leicester, Leicestershire - 34 miles
A fantastic opportunity has arisen for a Print Machine Operator to join the team of an award winning and successful volume manufacturing business based in Leicester. You will receive a salary of up to £12.10 after the training period (£9.50 ph during the 6 month training period) plus excellent overtime / holiday arrangements, and the security of working for a well established local company. Industry specific training will be provided.As Bindery Operator / Print Machine Operator your duties will include:• Setting print finishing and binding machinery• Ensuring that faults are dealt with swiftly and that machinery is kept running• Working on a three shift rotating pattern• Completing paperwork and reporting to managementThere is overtime available at weekends, and a flexible approach is requiredThe ideal Print Machine Operator will have the following skills and experience:• Be an experienced machine setter / operator with good mechani | |
Seamstress/ Tailor/ Sewing - Alterations & Repairs - £6.20 - £6.50/hour
Leicester, East Midlands - 35 miles
We are looking for an experienced sewing machinist to work for our client in branch. Good communications skills and are essential. The successful candidate will be responsible for making alterations and repairs to garments, and also to soft furnishings within the agreed timescales. You must also have the ability to offer solutions to any problems that may arise.Candidates will be expected have previous experience of completing alterations and repairs within a customer facing environment and project a professional image at all times | |
Quality Control - £8.78 - £10.09/hour
Grantham, Lincolnshire - 39 miles
This role is for a large food factory in Grantham, you will have experience of using critical control points including Metal Detector and Temperature checks, checks and cook-ups to ensure products adhere to customer specifications and paperwork to ensure product traceability.This will be a 4 on 4 off shift Nights 7pm - 7amThere are also day shifts available 4 on 4 off 7am - 7pm | |
Production operative - £6/hour
Boston, Lincolnshire, England, Lincolnshire - 39 miles
Our client based in Boston is looking for Production Operatives that are available immediately. The role will involve packing fruit, re labelling products and some quality checking.Please call Kasia Jekielek on 01733 558877 if you are interested |  |
Machine Operative - £8.38/hour
Grantham, Lincolnshire - 39 miles
This role is on nights 4 on 4 off 7pm - 7am including weekends and bank holidays. You will have previous machine op experiencePrevious experience is essential working with machinery, ideally within a food environment | |
Flat/Post Leather Sewing Machinist - £7 - £9/hour
Wigston, Lincolnshire - 39 miles
My client is a manufacturer of an exciting and growing brand based in South Leicester. You will be an experienced flat or post machinist capable of producing items from thick leather to an accurate and speedy standard. Candidates who have previous experience in the shoe / automotive upholstery industry have prevously been very successful, however, extensive experience in using industrial sewing machines may be enough experience to allow you to be trained to standard. An immediate start is available for the right candidates so call NOW or email your CV to apply. This is a temp to perm position with excellent prospects. This vacancy is being advertised by Jark Industrial who are operating as an employment agency business. Please note that due to the high volume of applications currently being received for our vacancies, we are regrettably unable to reply to everyone. Therefore if you have not heard from us within seven days of your application, please assume that on this occasion you h | |
Customer Complaint Assistant - £6.20 - £6.50/hour
Scunthorpe, Lincolnshire - 39 miles
Customer Complaint AdvisorTemporary Contract£6.20+ PHScunthorpe areaThe ideal candidate will ensure that all complaints for the group are processed and all management are aware of the complaint levels being received.Develop and devise report formats for KPI's at site and group level for individual customers.To generate and also collate the KPI Reports requested by customers and senior managers, including customer reportsTo ensure efficient communication with regards to depot rejections, to enable a replacement to be organised if possible, in conjunction with Supply Chain and Operations.The registering of all consumer complaints for the group and forwarding to each site. This includes some which are on the internet which have to be downloaded and liaised with each supplying site.This advert was posted by Gi Group Holdings Ltd trading as a recruitment business.Please send your CV to the high volumes of applications we are currently receiving, unfortunately we |  |
Part Time Manufacturing vacancies in Nottinghamshire can also be found by following the suggested other specialist UK job websites at the top of this page.
